Maytag Centennial Washer Not Spinning

Maytag Centennial Washer Not Spinning issue can be quite frustrating. Because it prevents the washer from completing its cycle and can leave your laundry damp and unwashed.

It’s important to fix this issue as soon as possible as it can cause more problems in the future and may even damage your washer. Plus, having a properly working washer ensures that your laundry comes out clean and fresh every time.

So, what causes your Centennial washer not to spin? Well, there are several potential reasons, including a faulty lid switch, a worn or broken drive belt, a defective drive motor, or a faulty clutch assembly. But don’t worry, fixing the issue isn’t as complicated as it may seem.

We’ll cover everything from checking the power source to inspecting the drive motor and clutch assembly. By the end of this article, you’ll have a better understanding of how to troubleshoot and resolve this issue, and you’ll be well on your way to having a working washer again.

Maytag Centennial Washer Not Spinning Issue Fixing

How To Fix Maytag Centennial Washer Not Spinning Issue – Step by Step

Check the Power Source

Before diving into the more complex potential causes of spinning issues, it’s always a good idea to start with the basics. One of the first things to check is the power source. Here are the steps you can take:

First, make sure that your washer is plugged in properly. It’s possible that the plug may have been knocked loose during a previous cycle or during cleaning. Check to ensure that the plug is firmly connected to the outlet.

Next, check the circuit breaker or fuse box. If the circuit breaker has tripped or the fuse has blown, your washer won’t be receiving power. If you find that the circuit breaker has tripped or the fuse has blown, reset or replace it as necessary.
Finally, verify that the outlet is providing power. You can do this by plugging in a different appliance, such as a lamp or phone charger, and seeing if it works. If the outlet isn’t providing power, you may need to call an electrician to fix the issue.

By checking the power source, you can quickly rule out one potential cause of your washer’s spinning issue. If you find that the power source isn’t the problem, you can move on to checking the other potential causes.

Check the Lid Switch

A faulty lid switch is another potential cause of the spinning issue. The lid switch is an important safety feature that prevents the washer from spinning when the lid is open. Here’s what you need to know about the lid switch and how to check if it’s causing the problem:

The lid switch is located on the top of the washer and is activated by a small plunger on the lid. When the lid is closed, the plunger depresses the switch and allows the washer to spin. If the lid switch is faulty, the washer won’t spin even when the lid is closed.
To test if the lid switch is faulty, start by unplugging the washer and locating the switch. You can typically find the switch under the top panel of the washer, near the lid hinge. Use a multimeter to test the continuity of the switch. If the switch doesn’t have continuity when the lid is closed, it’s likely faulty.

If you’ve determined that the lid switch is the cause of the Maytag Centennial washer won’t spinning issue, you’ll need to replace it. To do so, first, disconnect the wiring harness from the old switch and remove any mounting screws. Then, install the new switch by reversing the steps you took to remove the old one. Be sure to test the washer after replacing the switch to ensure that it’s working properly.

Checking the lid switch is an easy and relatively inexpensive way to troubleshoot the Centennial washer’s spinning issue. If you find that the switch isn’t causing the problem, you can move on to checking the other potential causes.

Inspect the Drive Belt

If the power source and lid switch don’t appear to be the cause of spinning problem, it’s time to examine the drive belt. Here’s what you need to know about the drive belt and how to check if it’s causing the problem:

The drive belt is a long, thin rubber belt that wraps around the motor pulley and the drum of the washer. It’s responsible for rotating the drum and allowing the washer to spin. If the drive belt is worn or broken, it won’t be able to do its job and the washer won’t spin.
To check if the drive belt is worn or broken, start by unplugging the washer and locating the belt. You can typically find the belt by removing the back panel of the washer. Look for any signs of wear, such as cracks or fraying. If the belt appears to be in good condition, test it for tension by pushing down on it. If the belt doesn’t feel taut, it may need to be tightened or replaced.
If you’ve determined that the drive belt is the cause of the spinning problem, you’ll need to replace it. To do so, first, remove the old belt by releasing tension on the tensioner pulley and sliding the belt off the motor and drum pulleys. Then, install the new belt by reversing the steps you took to remove the old one. Be sure to test the washer after replacing the belt to ensure that it’s working properly.

Testing the drive belt is another easy and relatively inexpensive way to fix Maytag Centennial washer’s spinning problem. If you find that the drive belt isn’t causing the problem, you can move on to checking the other potential causes.

Inspect the Drive Motor

If the power source, lid switch, and drive belt don’t seem to be the cause of the spinning problem, it’s time to inspect the drive motor. Here’s what you need to know about the drive motor and how to check if it’s causing the problem:

The drive motor is responsible for powering the washer’s drum and spinning it. If the drive motor is defective, the washer won’t be able to spin. The motor is located at the bottom of the washer, beneath the drum.

To test if the drive motor is defective, start by unplugging the washer and accessing the motor. Use a multimeter to test the motor’s continuity by measuring the resistance between the motor’s terminals. If the motor doesn’t have continuity, it’s likely faulty. Another way to check the motor is by looking for any signs of damage or burning around the motor.
If you’ve determined that the drive motor is the cause of spinning issue, you’ll need to replace it. Replacing the motor can be a bit more challenging than the other troubleshooting steps, as it requires some disassembly of the washer. If you’re not comfortable doing this, it’s best to hire a professional. However, if you’re up for the task, start by removing the belt and disconnecting the wiring harness from the motor. Then, remove the mounting bolts and lift the motor out of the washer. Install the new motor by reversing the steps you took to remove the old one.

Check the Clutch Assembly

If you’re still experiencing Maytag Centennial Washer Not Spinning issue after checking the power source, lid switch, drive belt, and drive motor, it’s possible that the clutch assembly is the culprit. Here’s what you need to know about the clutch assembly and how to inspect and replace it:

The clutch assembly is responsible for engaging the transmission to spin the drum. If the clutch is worn or faulty, it won’t be able to engage the transmission properly, causing the washer not to spin. The clutch is located between the transmission and the drive motor.
To inspect if the clutch assembly is faulty, start by removing the washer’s cabinet and accessing the clutch. Check for any signs of damage or wear, such as cracks or burning. You can also test the clutch using a multimeter to measure its continuity. If it doesn’t have continuity, it’s likely that the clutch is worn out and needs to be replaced.
If you’ve determined that the clutch assembly is causing the spinning issue, you’ll need to replace it. This can be a more complex repair and may require some experience with washer repairs. Begin by removing the drive motor, transmission, and brake assembly to access the clutch. Remove the old clutch and replace it with a new one, following the manufacturer’s instructions. Reassemble the washer and test to ensure that it’s spinning properly.

Inspecting and replacing the clutch assembly is the final troubleshooting step for fixing spinning related issues. If you’ve gone through all of the previous steps and still have the same problem, it may be time to call a professional or consider replacing the washer altogether.

FAQ

Maytag centennial washer not spinning fast enough – How to Fix?

If your washer is not spinning fast enough, there are a few things you can try:

Check the load size: Overloading the washer can cause it to spin slower. Make sure you’re not exceeding the recommended load size for your washer.

Verify the spin speed: Check the washer settings to ensure that the spin speed is set to the highest level.
Inspect the drain hose: Make sure the drain hose is not kinked, twisted, or clogged, as this can cause the washer to spin slower.
Clean the washer: A buildup of detergent, fabric softener, or other residues can affect the washer’s performance. Try cleaning the washer drum, dispenser, and filter.

Inspect the drive belt: A worn or damaged drive belt can cause the washer to spin slower. Check the belt for signs of wear or damage, and replace it if necessary.

If none of these solutions work, it’s best to contact a professional for further troubleshooting and repair.

Maytag centennial washer not spinning or draining – How to fix?

If your Centennial washer is not spinning or draining, here are some steps you can take to fix the issue:

Check the power source: Verify that the washer is properly plugged in and that the circuit breaker or fuse is not tripped.
Inspect the lid switch: The lid switch prevents the washer from spinning if the lid is open. Make sure the switch is functioning properly and replace it if necessary.
Check the drain hose: A clogged or kinked drain hose can prevent the washer from draining. Ensure that the hose is clear and free of obstructions.

Inspect the pump: The pump removes water from the washer during the drain cycle. Check the pump for any obstructions or damage, and replace it if necessary.
Check the drive belt: A worn or damaged drive belt can prevent the washer from spinning or draining. Inspect the belt for signs of wear or damage and replace it if necessary.
Inspect the motor: The motor drives the washer drum and can be a cause of spinning and draining issues. Check the motor for any damage or wear and replace it if necessary.

If you are unsure how to perform any of these steps, it’s best to contact a professional for further assistance.

Maytag centennial washer not spinning clothes dry enough – How to fix?

If your washer is not spinning clothes dry enough, here are some steps you can take to fix the issue:

Check the load size: Overloading the washer can prevent clothes from spinning dry enough. Make sure you are not exceeding the washer’s recommended load size.

Adjust the cycle settings: Some cycle settings may not spin clothes as dry as others. Try using a different cycle setting that is designed for a more thorough spin.
Check the drain hose: A clogged or kinked drain hose can prevent the washer from draining properly, leaving clothes wetter than they should be. Ensure that the hose is clear and free of obstructions.
Inspect the pump: The pump removes water from the washer during the drain cycle. Check the pump for any obstructions or damage, and replace it if necessary.

Check the drive belt: A worn or damaged drive belt can prevent the washer from spinning clothes dry enough. Inspect the belt for signs of wear or damage and replace it if necessary.
Inspect the motor: The motor drives the washer drum and can be a cause of spinning issues. Check the motor for any damage or wear and replace it if necessary.

If you are unsure how to perform any of these steps, it’s best to contact a professional for further assistance.

Wrap Up

To fix the Maytag Centennial washer not spinning issue, start by checking the power source, lid switch, drive belt, drive motor, and clutch assembly. Some of these repairs may require experience, so it’s best to call a professional if you’re unsure. Fixing the issue can save you time and money compared to buying a new washer.

For additional support, contact Maytag customer support or consult online forums. By troubleshooting methodically, you’ll be able to diagnose and fix the issue.