Maytag Commercial Technology Washer Troubleshooting: Best Guide

Maytag Commercial Technology washers are known for their durability and powerful cleaning. But even the toughest machines can run into issues. When your Maytag Commercial Technology washer isn’t working right, it can disrupt your laundry routine. This comprehensive guide will help you understand common problems, their causes, and how to fix them. We will dive deep into Maytag Commercial Technology washer troubleshooting, ensuring you get your machine back in top shape.

Common Maytag Commercial Technology Washer Problems and Solutions

Let’s explore the most common issues you might face with your Maytag Commercial Technology washer and how to resolve them.

1. Washer Won’t Start

A washer that won’t start is frustrating. This problem often has simple solutions.

Possible Causes and Solutions:

• No Power:
  • Check the power cord: Ensure it’s fully plugged into a working outlet.
  • Circuit breaker: Check your home’s circuit breaker. Reset it if it’s tripped.
  • Power outage: Confirm there hasn’t been a power outage in your area.
• Door/Lid Not Fully Closed or Locked:
  • Front-load washers: The door must be firmly closed and locked for the cycle to begin. Check for any items blocking the door latch.
  • Top-load washers: The lid must be completely closed. The lid lock mechanism must engage.
• Control Lock Activated:
  • Many Maytag models have a Control Lock (or “LoC”/”LC” error) feature. This prevents accidental use. Look for a “Control Lock” button. Press and hold it for a few seconds to deactivate. Consult your manual for the exact procedure for your model.
• Start Button Not Held Long Enough:
  • Some Maytag washers require you to press and hold the Start button for a few seconds (often 3 seconds) for the cycle to begin.
• Error Code Displayed:
  • If an error code appears, refer to the Error Codes section below for specific troubleshooting steps.
• Faulty Electronic Control Board or User Interface:
  • If none of the above work, the electronic control board or user interface might be faulty. These parts control the washer’s functions. This often requires professional diagnosis and repair.

2. Washer Not Draining

If your clothes are soaked at the end of a cycle, your washer is likely not draining.

Possible Causes and Solutions:

• Kinked or Clogged Drain Hose:
  • Check the drain hose: Ensure it’s not bent, twisted, or obstructed. Straighten any kinks.
  • Clear clogs: Disconnect the drain hose from both the washer and the drainpipe. Look for lint, debris, or small items inside. Flush it with water to clear any blockages.
• Clogged Drain Pump Filter:
  • Maytag washers often have a drain pump filter designed to catch lint and small objects. If clogged, it prevents proper drainage.
  • Locate the filter: It’s usually at the front bottom of the washer, behind a small access panel.
  • Clean the filter: Place a shallow pan or towels underneath to catch water. Unscrew and remove the filter. Clean it thoroughly under running water. Remove any debris.
• Improper Drain Hose Installation:
  • The drain hose needs to be installed at the correct height. If it’s too high (over 96 inches) or too low, it can affect drainage. Refer to your owner’s manual for proper installation height.
• Excessive Suds:
  • Too much detergent, especially non-HE detergent in an HE machine, can create excessive suds. This makes draining difficult. The washer might display a “Sud” or “Sd” error.
  • Solution: Use only HE (High-Efficiency) detergent and the recommended amount. The washer may automatically extend rinse times to clear suds. You can run a “Rinse & Spin” cycle.
• Defective Drain Pump:
  • If the above solutions don’t work, the drain pump itself might be faulty. You might hear a humming sound, but no water movement, or no sound at all. This requires professional repair.

3. Washer Not Spinning

Wet clothes after a wash cycle indicate a spinning issue.

Possible Causes and Solutions:

• Unbalanced Load:
  • This is a very common cause. If clothes are unevenly distributed or the washer is overloaded, the machine will not spin to prevent damage.
  • Redistribute the load: Open the lid/door. Untangle clothes and spread them evenly around the drum. Remove some items if overloaded. Restart the spin cycle.
• Excessive Suds:
  • Similar to drainage problems, too many suds can prevent the washer from reaching full spin speed. The washer will add water to dilute the suds, causing delays.
  • Solution: Use HE detergent and proper amounts.
• Drainage Issues:
  • If the water hasn’t drained completely, the washer will not spin. Refer to the “Washer Not Draining” section.
• Worn Drive Belt (on some models):
  • Some Maytag Commercial Technology washers use a drive belt. If it’s worn, loose, or broken, the drum won’t spin. This usually requires professional replacement.
• Faulty Lid Switch or Door Latch:
  • The washer won’t spin if it doesn’t detect the lid or door is securely closed and locked. Check for obstructions. The switch or latch might be faulty and need replacement.
• Motor or Motor Control Board Issues:
  • If the motor isn’t receiving power or is malfunctioning, the washer won’t spin. This is a more complex issue, often requiring a technician.

4. Washer Making Loud Noise

Unusual noises can signal various problems.

Possible Causes and Solutions:

• Unbalanced Load:
  • A common culprit for banging, thumping, or vibrating noises during the spin cycle.
  • Solution: Redistribute the load.
• Foreign Objects in the Drum or Pump:
  • Coins, buttons, or small items can get caught in the drum or drain pump, causing rattling or grinding noises.
  • Check the drum: Inspect the drum for any loose items.
  • Check the drain pump filter: Clean it thoroughly.
• Worn Bearings:
  • A continuous grinding or roaring sound, especially during spin, often points to worn tub bearings. This is a major repair. It may be costly.
• Loose or Worn Drive Belt:
  • A squealing or burning rubber smell might indicate a loose or worn drive belt.
• Shock Absorbers or Suspension Rods:
  • These parts dampen vibrations. If they are worn or broken, the washer will shake excessively and make loud noises.

5. Washer Not Filling with Water

If your washer isn’t filling, check these points.

Possible Causes and Solutions:

• Water Supply Turned Off:
  • Ensure both the hot and cold water supply valves are fully open.
• Kinked or Clogged Inlet Hoses:
  • Check the water inlet hoses for kinks. Disconnect them and check for clogs in the screens where they connect to the washer. Clean the screens if needed.
• Low Water Pressure:
  • If your home has low water pressure, the washer may take longer to fill or not fill completely.
• Faulty Water Inlet Valve:
  • The water inlet valve controls water flow into the washer. If it’s defective, it won’t open to let water in. You might not hear the typical “fill” sound.

Maytag Commercial Technology Washer Error Codes

Modern Maytag Commercial Technology washers often display error codes. These codes help pinpoint the problem. Always consult your owner’s manual for a full list of codes specific to your model. However, here are some common ones:

Error Code	Potential Meaning	Common Solution
LoC / LC	Control Lock Activated	Press and hold Control Lock button.
F5 E2	Door not locking properly	Check for obstructions, close door firmly.
F7 E1	Motor speed sensing error	Check for shipping bolts, ensure load is not too big.
F8 E1 / Lo FL	Low water flow detected	Check water supply, inlet hoses for kinks/clogs.
F9 E1	Drain time too long	Check drain hose for kinks/clogs, clean pump filter.
Sud / Sd	Excessive suds	Use HE detergent, reduce amount. Washer may auto-rinse.
rL / F34	Items in washer during Clean Washer cycle	Remove items, restart Clean Washer cycle.
Int	Cycle interrupted/paused	Press Pause/Cancel twice, then Power once.

This table provides general guidance. Always refer to your specific Maytag washer’s owner’s manual for accurate error code definitions and troubleshooting steps.

Maintenance Tips for Your Maytag Commercial Technology Washer

Preventative maintenance is key to extending the life of your Maytag Commercial Technology washer and avoiding common issues.

• Clean the Drain Pump Filter Regularly: At least every 2-3 months, or more often if you wash heavily soiled items.
• Use HE Detergent Correctly: Always use high-efficiency detergent and follow the manufacturer’s recommended amount. Overdosing can lead to suds issues and residue buildup.
• Run a “Clean Washer” Cycle: Use an affresh® washing machine cleaner tablet or liquid chlorine bleach (if compatible with your model) monthly to prevent odors and buildup.
• Inspect Hoses and Connections: Periodically check inlet and drain hoses for signs of wear, kinks, or leaks. Replace them if damaged.
• Leave the Door/Lid Ajar After Use: This allows the interior to dry, preventing mold and mildew growth and unpleasant odors.
• Avoid Overloading: Overloading puts strain on the motor and can lead to unbalanced loads, poor cleaning, and spin issues.
• Clean the Dispenser Drawer: Remove and clean the detergent and fabric softener dispenser drawer regularly to prevent buildup.
• Check Pockets: Always check pockets before washing to prevent foreign objects from entering the machine and damaging components.

FAQ

Why does my Maytag Commercial Technology washer stop mid-cycle?

This often happens due to an unbalanced load, excessive suds, or a drainage issue. The washer might pause to try and correct the problem. Check the load, ensure proper detergent use, and verify the drain hose and pump filter are clear. It could also indicate an error code; check the display.

How do I reset my Maytag Commercial Technology washer?

For a soft reset, unplug the washer from the power outlet for about 5 minutes. Then, plug it back in. This can clear minor electronic glitches. For specific control panel resets, consult your owner’s manual, as procedures vary by model.

Can I use regular detergent in my Maytag Commercial Technology HE washer?

No, it’s strongly recommended to use only HE (High-Efficiency) detergent in HE washers. Regular detergent produces too many suds, which can lead to drainage and spinning issues, detergent residue on clothes, and potential damage to the machine over time.

My washer smells bad. What can I do?

A musty smell often indicates mold or mildew buildup. Run a “Clean Washer” cycle monthly with an affresh® tablet or bleach (if suitable for your model). Leave the door or lid ajar after each use to allow the interior to dry. Clean the dispenser drawer and door seals regularly.

Why are my clothes still wet after the spin cycle?

The most common reasons are an unbalanced load or drainage problems. Redistribute the laundry evenly in the drum. Check the drain hose for kinks and clean the drain pump filter. Excessive suds can also prevent proper spinning.

Bottom Line

Maytag Commercial Technology washer troubleshooting doesn’t have to be daunting. By understanding common issues, performing regular maintenance, and knowing when to seek professional help, you can keep your machine running efficiently. Most problems have straightforward solutions. This guide aims to empower you to tackle them with confidence, ensuring your Maytag Commercial Technology washer delivers powerful cleaning for years to come.