Maytag Dishwasher Flashing Lights or Blinking: How To Fix?

If your Maytag dishwasher lights are blinking, try resetting it by turning off the power for a few minutes. Check for a blocked filter, and ensure the door is securely closed. If issues persist, consult the user manual for specific error codes or consider professional assistance for a thorough inspection and repair.

Are you facing Maytag dishwasher flashing lights or blinking issues? You’re not alone. This is a common issue that can occur for various reasons. But before you panic and consider replacing your dishwasher, it’s essential to understand that it may be fixable.

It is a malfunction that can happen due to different factors, including control board failure, door latch issues, clogged filters, and motor or pump problems. When your dishwasher starts flashing lights, it’s indicating that there is a problem that needs attention. Ignoring it can result in costly repairs and even permanent damage to the appliance.

Thus, fixing the problem is crucial to ensure the proper functioning of your appliance and avoid potential damages. Here, we will guide you through the steps to resolve the issue and prevent it from occurring in the future. Whether you’re a DIY enthusiast or need professional help, understanding the problem and its solutions can save you time, money, and frustration.

So, let’s dive in and explore how to fix the flashing lights problem.

Understand Maytag Dishwasher Flashing Lights Problem

Just go through the causes and symptoms to understand the problems clearly.

Causes of Flashing Lights or Blinking Problem

It happens due to various reasons, including:

1. Control board failure: If the electronic control board of the dishwasher is damaged, it can cause the dishwasher to display flashing lights, indicating a problem.
2. Door latch issues: Problems with the door latch can prevent the dishwasher from starting, leading to flashing lights.
3. Motor or pump failure: If the dishwasher’s motor or pump assembly is faulty, it can cause the dishwasher to stop functioning and display flashing lights.
4. Clogged filters or drains: If the dishwasher’s filter or drain is clogged, it can cause water backup and prevent the dishwasher from starting, leading to flashing lights.

Symptoms of Flashing Lights Problem

The primary symptom is the flashing lights on the control panel when you try to start the dishwasher. These lights may flash in a pattern or sequence, indicating a specific problem with the appliance. In some cases, the dishwasher may also emit beeping sounds along with the flashing lights.

Consequences of Ignoring the Flashing Lights Problem

Ignoring Maytag dishwasher blinking lights problem can lead to several consequences, including:

1. Costly repairs: Delaying the repair of the dishwasher can lead to more significant problems and, ultimately, cost you more money in repairs.
2. Permanent damage: If the problem is not fixed promptly, it can cause permanent damage to the dishwasher, rendering it unusable.
3. Water damage: Clogged filters and drains can cause water backup and lead to water damage in your home, requiring costly repairs.

Steps to Fix Maytag Dishwasher Flashing Lights or Blinking Problem

If you are experiencing flashing lights problem, here are some steps you can take to fix it:

Step 1: Turn off the dishwasher and unplug it

The first step is to turn off the dishwasher and unplug it from the power source to prevent any electrical hazards.

Step 2: Check the control panel and door latch

Check the control panel and the door latch for any visible damage or obstruction. Sometimes, debris or food particles can get stuck in the latch, causing the dishwasher to display flashing lights. Clean the latch and make sure it latches properly.

Step 3: Inspect dishwasher’s electronic control board

Inspect the electronic control board of the dishwasher for any visible damage or signs of burning. If you notice any damage, you may need to replace the control board.

Step 4: Inspect dishwasher’s motor and pump assembly

Inspect your dishwasher’s motor and pump assembly for any damage or obstruction. Sometimes, debris or foreign objects can get stuck in the motor or pump, causing the dishwasher to stop functioning and display flashing lights. Remove any obstruction and make sure the motor and pump are functioning correctly.

Step 5: Clean dishwasher’s filters and drain

Check the dishwasher’s filters and drain for any clogs or obstructions. Clean the filters and drain thoroughly to ensure proper drainage and prevent any water backup.

Step 6: Check dishwasher’s water inlet valve

Inspect the dishwasher’s water inlet valve for any damage or leaks. Replace the valve if you notice any damage or leaks.

Step 7: Reset the dishwasher

Once you have completed all the steps, plug the dishwasher back in and reset it. This may involve pressing and holding specific buttons on the control panel or turning off the power supply and then turning it back on.

Above mentioned steps can help you fix your dishwasher’s flashing lights problem. However, if the problem persists, you may need to seek the assistance of a professional appliance repair technician.

Prevent Your Maytag Dishwasher’s Future Flashing Lights Problem

To prevent the lights problem from occurring in the future, here are some tips for maintaining your dishwasher:

• Clean your dishwasher regularly: Regularly cleaning your dishwasher, including the filters and spray arms, can help prevent any buildup of debris or food particles that can clog the dishwasher’s components.
• Use the right detergent: Using the right detergent is important for keeping your dishwasher in good condition. Make sure to use detergents that are specifically designed for dishwashers and follow the manufacturer’s instructions for dosage.
• Avoid overloading your dishwasher: Overloading your dishwasher can damage its components, including the spray arms and motor, and cause the dishwasher to malfunction. Make sure to load your dishwasher properly, leaving enough space between dishes and not overcrowding the dishwasher.
• Rinse dishes before loading them: Rinsing dishes before loading them in the dishwasher can help prevent food particles from clogging the dishwasher’s components, such as the filters and drain.
• Check dishwasher’s water temperature: Make sure that the water temperature in your dishwasher is set to the recommended temperature range. Water that is too cold or too hot can damage the dishwasher’s components and cause the dishwasher to malfunction.

Final Words

If you do encounter the Maytag dishwasher flashing lights or blinking problem, don’t hesitate to take action. By following the steps we’ve provided and properly maintaining your dishwasher, you can keep it running smoothly and avoid future issues.

We hope this article has been helpful in solving the problem and preventing it from happening again in the future.